降低firmware版本后Ultrium460/library通讯故障

降低firmware版本后Ultrium460/library通讯故障
    当Ultrium460驱动器的firmware版本从 F43W降低到F3CW后可能会导致驱动器和磁带库的通讯中断，驱动器将被显示为offline。

    以下是受影响的产品： • 343378-B21 -- ESL 9595 Extended Tape Library • 330731-B21 -- MSL6030 0-dr, Ultrium 460, LVDS, RM Lib • 330731-B22 -- MSL6030 1-dr, Ultrium 460, LVDS, RM Lib • 330731-B23 -- MSL6030 2-dr, Ultrium 460, LVDS, RM Lib • 330731-B24 -- MSL6030 1-dr, Ultrium 460, Fibre, RM Lib • 330731-B25 -- MSL6030 2-dr, Ultrium 460, Fibre, RM Lib • 330788-B21 -- MSL6030 1-dr, Ultrium 460, LVDS, TT Lib • 330788-B22 -- MSL6030 2-dr, Ultrium 460, LVDS, TT Lib • 331196-B21 -- MSL6060 2-dr, Ultrium 460, LVDS, RM Lib • 331196-B22 -- MSL6060 2-dr, Ultrium 460, Fibre, RM Lib • 331196-B23 -- MSL6060 0-dr, Ultrium 460, LVDS, RM Lib • 331195-B21 -- MSL6060 2-dr, Ultrium 460, LVDS, TT Lib • AA927A -- HP StorageWorks 1/8 Ultrium 460 autoldr • 330821-B21 -- HP SSL1016 Ultrium 460 tape autoloader
    解决方法：必须对磁带库执行power-cycling或者resetting驱动器 To power-cycle a drive in a MSL library: 1. Select Menu 2. Select Maintenance 3. Select Replace Drive 4. Select Deactivate Drive n (where n is the drive number that you need to reset) 5. Unseat the drive that was powered off (the LED on the back on the back of the drive will be off) 6. Reseat the drive. This should automatically power on the drive